indexwhtbkgrd3
indexwhtbkgrd1
Superior Quality metal stamping, wire forming, welding (tig, mig and sonic), assembly, heat-treating and a wide variety of metal finishing. Specializing in machine gun link, ammo clip, and other ammunition components.
downloadsheetbtn
requestsamplebtn

 

TERMS AND CONDITIONS OF PURCHASES

EXPORTING REGULATIONS
All IOT military products shipping internationally require an approved US State Department export license, which International Ordnance will obtain for our customer. All IOT military products can be sold or shipped within the USA; however, they cannot be exported outside of the USA at any time without obtaining an approved US State Department export license. When any IOT military products are shipping outside the USA, under an approved export license, the product cannot be re-exported to another country or end user without obtaining a newly approved US State Department export license. It is our customer’s full responsibility to obtain an approved export license for the purposes of exporting or re-exporting any IOT military products, once the goods have shipped from our facility.

MILITARY PRODUCT INSPECTION & CERTIFICATION VARIANCE

IOT has a product based, continual final inspection procedure, for IOT’s standard lot size, that meets or exceeds all military requirements.

Orders that are less than the products maximum lot size, or IOT’s standard lot size, are considered a “Small Lot” and may be subject to reduced samplings, unless otherwise specified.

When complete military lot inspections are required for “small lots”, a small lot charge may apply.

Product certifications will not be provided on small lots unless specified in purchase order, technical data pack, identified as Government contract, or the order is a qualifying or FAAT lot.

ACCEPTANCE OF ORDERS

1. All orders will be subject to acceptance by International Ordnance Tech., Inc. (IOT), Jamestown, NY.

2. Orders will be accepted at the quoted prices subject to adjustments to meet any material, natural resources and cost of manufacturing increases. Orders will be invoiced at prices reflecting actual costs at time of shipment. Increased quantity requests on an existing order will be accepted at the same price only if no shipments have been made on that order. Otherwise, the increased quantities may be subject to rejection or a price increase.

3. Unless otherwise stated, all prices are quoted in U.S. Dollars. All quoted prices are subject to the addition of any applicable sales, excise, use or other taxes levied by either municipal, state or federal authorities.

4. Orders amounting to less than $75.00 are subject to a minimum charge of $75.00. Pre-paid freight charges will be billed at the original freight charge, plus the cost of $20.00/shipment, for a handling fee to cover administrative fees, if considered necessary by IOT.

REMEDIES

Upon satisfactory proof of claim by Purchaser, IOT will within a reasonable time, make necessary repairs or replacements, or, where the foregoing are deemed by IOT to be commercially impractical, refund the purchase price upon return of the products. Repair or replacement parts provided under this remedy will be supplied by IOT free of charge, F.O.B. destination, freight prepaid at the lowest available commercial rate. Purchaser charges for repairs, replacements or returns for credit will not be allowed unless previously authorized by IOT in writing. IOT’s liability (whether for breach of contract, breach of warranty, tort or any other claim) in connection with IOT’s products shall not exceed the purchase price of the products, and IOT’s said liability for Purchaser's materials in IOT’s possession shall not exceed IOT’s charges for work done on the materials. IT IS EXPRESSLY AGREED THAT THE FOREGOING REMEDY IS SOLE AND EXCLUSIVE AND STATES THE FULL EXTENT OF IOT’S LIABILITY. NO OTHER REMEDY WILL BE ALLOWED, WHETHER IN CONTRACT OR TORT (INCLUDING STRICT LIABILITY AND NEGLIGENCE). IOT WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR COSTS OF ANY KIND RESULTING DIRECTLY OR INDIRECTLY FROM IOT’S PRODUCTS, INCLUDING WITHOUT LIMITATION FIELD LABOR OR EQUIPMENT COSTS, LOSS OF PROFITS, PRODUCTION, SALES OPPORTUNITIES OR BUSINESS REPUTATION, OVER HEAD EXPENSE OR DAMAGE TO EQUIPMENT OR PROPERTY.

TOOLS AND DIES

Die preparation and tool usage charges do not convey the right to remove tools or dies from IOT’s premises or impose on IOT the obligation to preserve them longer than two years from the date of Purchaser's last order. Tool drawings are not furnished without a written agreement and additional charge. All tool and die charges will be billed in three progress payments to Purchaser upon completion with payment terms of net 30 days.

GENERAL PROVISIONS

1. IOT reserves the right to under ship or over ship orders by 5% of quantity ordered.

2. Written approval from the Purchaser of any quoted deviations from original specifications is required.

3. Terms of payment are subject to change by IOT at any time.

4. Interest will be charged on any account past due 61 days at a rate of .05% per day, beginning on the 61st day.

4. Prices are quoted F.O.B. Jamestown, New York.

5. Written permission must be obtained from IOT before returning materials to its plant or incurring any other charges to IOT. Unused products may not be returned, but IOT may provide assistance to find suitable users.

6. The failure of IOT to insist upon strict performance of any of the terms and conditions stated herein shall not be considered a continuing waiver of any such term or condition or any of IOT’s rights.

7. THE COMPLETE AGREEMENT BETWEEN IOT AND PURCHASER IS CONTAINED HEREIN AND NO ADDITIONAL OR DIFFERENT TERM OR CONDITION STATED BY PURCHASER SHALL BE BINDING UNLESS AGREED TO BY US IN WRITING. These terms and conditions shall supersede any provisions, terms and conditions contained on any purchase order, confirmation, acknowledgment or other writing the Purchaser may give or receive, and the rights of IOT and the Purchaser shall be governed exclusively by the terms and conditions hereof. If this quotation is accepted and the Purchaser’s purchase order form is used for that purpose, it is expressly and agreed that the terms and conditions herein set forth shall prevail insofar as they may in any way conflict with the terms and conditions set forth in such purchase order form, and the issuance of such purchase order by the Purchaser shall be deemed to indicate the Purchaser’s agreement with the foregoing.

8. This agreement shall be governed by New York State law, and all disputes arising hereunder shall be adjudicated in a court of competent jurisdiction in Chautauqua County, New York.

CHANGES, DELAYS, OR CANCELLATIONS

1. Notice of purchase order changes, delays, or cancellations must be made by Purchaser in writing and accepted by IOT in writing. Cancellations or delays by Purchaser will only be accepted on terms indemnifying IOT against associated losses.

2. For IOT orders, no cancellations will be accepted within 90 days of the scheduled ship date, and certain items will be subject to payment in full upon cancellation.

3. Order changes may not be accepted if shipments are scheduled within 60 days.

4. If Purchaser cancels or delays deliveries before material for ordered products has been received in IOT’s plant, IOT reserves the right to charge the Purchaser reasonable amounts for all obligations previously incurred by IOT in connection with such products. If Purchaser cancels deliveries or delays deliveries by more than 30 days after materials for ordered products has been received in IOT’s plant, IOT reserves the right to charge for the material and work previously obtained or performed in connection with such products.

5. All promised delivery dates are IOT’s best estimates, and may be subject to unforeseeable delays. IOT will not be liable for any delay in performance or delivery, or for damages suffered by Purchaser by reason thereof, if the delay is due to Purchaser's changes or other causes beyond IOT’s reasonable control, and in any such event, the time for delivery will be extended for a period equal to the time lost by reasons of any such delay.

6. All cancelled or delayed products or materials not shipped to Purchaser will be held up to 60 days without storage charges, after which time IOT reserves the right to impose storage charges.

WARRANTY

International Ordnance Tech., Inc. warrants to the Purchaser and the Purchaser only, that its products are manufactured in conformance to drawings and/or specifications furnished or approved by Purchaser.

WARRANTY LIMITATIONS

In order to establish a valid warranty claim, Purchaser must notify IOT within twelve (12) months of delivery of the product to the Purchaser. This warranty does not apply to any product which as been repaired or altered outside IOT’s factory in any way that in IOT’s judgment affects its original integrity, stability, or has been subjected to misuse, negligence, or accident. IOT neither assumes nor authorizes any person to assume for it, any other warranty or liability in connection with the sale of IOT’s products.

RETURN TO PRODUCTS

isowbelogos
isowbelogos1
  • aboutustab1
    • BAMcompanyprofile1
    • BAMmeetteam1
    • BAMhistory1
    • BAMquality1
    • BAMaffiliates1
    • nle
m10

btncofollowbadge1

subfooter
m12 m11 btncofollowbadge1 item6 item5 item4